Log in  \/ 
x
or
Register  \/ 
x

or
Welcome, Guest
Let's talk about everything related with our Virtual Numbers DID.

TOPIC: Unable to configure new DID in Asterisk!

Unable to configure new DID in Asterisk! 4 years 11 months ago #102

  • Forum - Fututel
  • Forum - Fututel's Avatar
  • Offline
  • Administrator
  • Posts: 112
  • Thank you received: 8
  • Karma: 1
Alternatively, SIP seems to be working well for people. Can I change my DID to be SIP as opposed to IAX?
Yes, you can change call forwarding option whenever you want.
It's working now. It was a problem in my extensions.conf file.
Great!!! :cheer:

Comenta!!! Quiero saber cómo puedo ayudarte. Responderé pronto.
Comment!!! I want to know how I can help you. I will answer soon.
The administrator has disabled public write access.

Unable to configure new DID in Asterisk! 4 years 11 months ago #101

Guys,

It's working now. It was a problem in my extensions.conf file.

I was using the wildcard 's' to capture all incoming calls. It seems it is required to specify the actual extension number associated with each DID.

Many tanks for your help. We can close this one.

-Luigo
The administrator has disabled public write access.

Unable to configure new DID in Asterisk! 4 years 11 months ago #100

Hi,

Thanks for your response. I have verified the configuration and it is in line with the instructions. I'm getting the same error.

With regards to your last post, can you confirm what file am I meant to add these lines to:

....
Expire : -1
ACL : Yes
Addr->IP : 46.19.209.77 Port 4569
...

Alternatively, SIP seems to be working well for people. Can I change my DID to be SIP as opposed to IAX?

thanks again.
The administrator has disabled public write access.

Unable to configure new DID in Asterisk! 4 years 11 months ago #99

  • Forum - Fututel
  • Forum - Fututel's Avatar
  • Offline
  • Administrator
  • Posts: 112
  • Thank you received: 8
  • Karma: 1
If the issue persists, what about if you deactivate ACL (set ACL: No) in regards with:
....
Expire : -1
ACL : Yes
Addr->IP : 46.19.209.77 Port 4569
...

?

Comenta!!! Quiero saber cómo puedo ayudarte. Responderé pronto.
Comment!!! I want to know how I can help you. I will answer soon.
The administrator has disabled public write access.

Unable to configure new DID in Asterisk! 4 years 11 months ago #98

  • Forum - Fututel
  • Forum - Fututel's Avatar
  • Offline
  • Administrator
  • Posts: 112
  • Thank you received: 8
  • Karma: 1
Hello:

Maybe you haven't configured the internal call forwarding correctly. For this, please modify the extensions.conf file according to the following article (new info was added):
How to Configure IAX-Asterisk with Phone2call's DIDs

You could also check this (somebody was able to connect to IAX Server):
phone2call.com/forum/virtual-numbers-did...-did-for-asterisk#24

We will be pending of your reply. :)

Comenta!!! Quiero saber cómo puedo ayudarte. Responderé pronto.
Comment!!! I want to know how I can help you. I will answer soon.
Last Edit: 4 years 11 months ago by Forum - Fututel.
The administrator has disabled public write access.

Unable to configure new DID in Asterisk! 4 years 11 months ago #94

I have added the entries on iax.conf as per the instructions in the wiki. however when I try to call my DID number, I get the following error:

IAX2 user ACL: Rejecting '46.19.209.77' due to a failure to pass ACL '( BASELINE')

So it seems that my asterisk server is seeing the call but it is rejecting it.

Can you help please? the instructions in the wiki refer to changes to the iax.conf and iax_general_custom.conf files but are there any other files I should be changing?


Adding a little more detail:

The full error message is: acl.c:748 ast_apply_acl: IAX2 user ACL: Rejecting '46.19.209.77' due to a failure to pass ACL '(BASELINE)'

and this is how my Asterisk sees the relevant extension:

ip-10-165-40-8*CLI> iax2 show peer 46.19.209.77


* Name : 46.19.209.77
Description :
Secret : <Not set>
Context : from-phone2call
Parking lot :
Mailbox :
Dynamic : No
Callnum limit: 0
Calltoken req: No
Trunk : Yes
Encryption : No
Callerid : "" <>
Expire : -1
ACL : Yes
Addr->IP : 46.19.209.77 Port 4569
Defaddr->IP : 0.0.0.0 Port 0
Username : extDID
Codecs : (g723|gsm|g729|speex|ilbc)
Codec Order : (none)
Status : Unmonitored
Qualify : every 60000ms when OK, every 10000ms when UNREACHABLE (sample smoothing Off)







thanks
Last Edit: 4 years 11 months ago by Luis Huerta. Reason: Added more details
The administrator has disabled public write access.
Time to create page: 0.125 seconds

We Support

  • pbxinaflash
  • asterisk
  • elastix
  • freepbx